[2017 November Cisco Latest] A Magnificent Learning Practice For The Best New Cisco 300-101 Dumps ROUTE Exam Questions Youtube Is Your Best Choice

Who has the valid new Cisco 300-101 dumps exam? “Implementing Cisco IP Routing” also known as 300-101 exam, is a Cisco certification which covers all the knowledge points of the real Cisco exam. A magnificent learning practice for the best Cisco new 300-101 dumps ROUTE exam questions youtube is your best choice. Pass4itsure Cisco 300-101 dumps exam questions answers are updated (484 Q&As) are verified by experts.

The associated certifications of 300-101 dumps is CCDP. The questions and answers established by our Cisco https://www.pass4itsure.com/300-101.html dumps experts on various parts of the certification curriculum contain comprehensive and the most recent information available.

Exam Code: 300-101
Exam Name: Implementing Cisco IP Routing
Q&As: 484

[2017 November Latest Cisco 300-101 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWWDdYaFM0SVFwMTA

[2017 November Latest Cisco 210-260 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWU0xad3NvRWR4Qzg

Pass4itsure Latest and Most Accurate Cisco 300-101 Dumps Exam Q&As:

QUESTION 6
What is the default OSPF hello interval on a Frame Relay point-to-point network?
A. 10
B. 20
C. 30
D. 40
300-101 exam Correct Answer: A
Explanation
Explanation/Reference:
Explanation:
Before you troubleshoot any OSPF neighbor-related issues on an NBMA network, it is important to remember that an NBMA network can be configured in these modes of operation with the ip ospf network command:
Point-to-Point
Point-to-Multipoint
Broadcast
NBMA
The Hello and Dead Intervals of each mode are described in this table:
Hello Interval Dead Interval

Network Type
(secs) (secs)
Point-to-Point 10 40
Point-to-Multipoint 30 120
Broadcast 10 40
Non-Broadcast 30 120

QUESTION 7
PPPoE is composed of which two phases?
A. Active Authentication Phase and PPP Session Phase
B. Passive Discovery Phase and PPP Session Phase
C. Active Authorization Phase and PPP Session Phase
D. Active Discovery Phase and PPP Session Phase
Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
PPPoE is composed of two main phases:
Active Discovery Phase–In this phase, the PPPoE client locates a PPPoE server, called an access concentrator. During this phase, a Session ID is assigned and the PPPoE layer is established. PPP Session Phase–In this phase, PPP options are negotiated and authentication is performed. Once the link setup is completed, PPPoE functions as a Layer 2 encapsulation method, allowing data to be transferred over the PPP link within PPPoE headers. Reference:
QUESTION 8
Which statement is true about the PPP Session Phase of PPPoE?
A. PPP options are negotiated and authentication is not performed. Once the link setup is completed, PPPoE functions as a Layer 3 encapsulation method that allows data to be transferred over the PPP link within PPPoE headers.
B. PPP options are not negotiated and authentication is performed. Once the link setup is completed, PPPoE functions as a Layer 4 encapsulation method that allows data to be transferred over the PPP link within PPPoE headers.
C. PPP options are automatically enabled and authorization is performed. Once the link setup is completed, PPPoE functions as a Layer 2 encapsulation method that allows data to be encrypted over the PPP link within PPPoE headers.
D. PPP options are negotiated and authentication is performed. Once the link setup is completed, PPPoE functions as a Layer 2 encapsulation method that allows data to be transferred over the PPP link within PPPoE headers.
300-101 dumps Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
PPPoE is composed of two main phases:
Active Discovery Phase–In this phase, the PPPoE client locates a PPPoE server, called an access concentrator. During this phase, a Session ID is assigned and the PPPoE layer is established. PPP Session Phase–In this phase, PPP options are negotiated and authentication is performed. Once the link setup is completed, PPPoE functions as a Layer 2 encapsulation method, allowing data to be transferred over the PPP link within PPPoE  headers.
QUESTION 9
Refer to the exhibit.
300-101 dumps

Which one statement is true?
A. Traffic from the 172.16.0.0/16 network will be blocked by the ACL.
B. The 10.0.0.0/8 network will not be advertised by Router B because the network statement for the 10.0.0.0/8 network is missing from Router B.
C. The 10.0.0.0/8 network will not be in the routing table on Router B.
D. Users on the 10.0.0.0/8 network can successfully ping users on the 192.168.5.0/24 network, but users on the 192.168.5.0/24 cannot successfully ping users on the 10.0.0.0/8 network.
E. Router B will not advertise the 10.0.0.0/8 network because it is blocked by the ACL.
Correct Answer: E
Explanation
Explanation/Reference:
Explanation:
You can filter what individual routes are sent (out) or received (in) to any interface within your EIGRP configuration. One example is noted above. If you filter outbound, the next neighbor(s) will not know about anything except the 172.16.0.0/16 route and therefore won’t send it to anyone else downstream. If you filter inbound, YOU won’t know about the route and therefore won’t send it to anyone else downstream.
QUESTION 10
A router with an interface that is configured with ipv6 address autoconfig also has a link local address assigned. Which message is required to obtain a global unicast address when a router is present?
A. DHCPv6 request
B. router-advertisement
C. neighbor-solicitation
D. redirect
300-101 pdf Correct Answer: B
Explanation
Explanation/Reference:
Explanation:
Autoconfiguration is performed on multicast-enabled links only and begins when a multicast- enabled interface is enabled (during system startup or manually). Nodes (both, hosts and routers) begin the process by generating a link-local address for the interface. It is formed by appending the interface identifier to well known link-local prefix FE80 :: 0. The interface identifier replaces the right-most zeroes of the link-local prefix. Before the link-local address can be assigned to the interface, the node performs the Duplicate Address Detection mechanism to see if any other node is using the same link-local address on the link. It does this by sending a Neighbor Solicitation message with target address as the “tentative” address and destination address as the solicited-node multicast address corresponding to this tentative address. If a node responds with a Neighbor Advertisement message with tentative address as the target address, the address is a duplicate address and must not be used. Hence, manual configuration is required. Once the node verifies that its tentative address is unique on the link, it assigns that link-local address to the interface. At this stage, it has IP-connectivity to other neighbors on this link. The autoconfiguration on the routers stop at this stage, further tasks are performed only by the hosts. The routers will need manual configuration (or stateful configuration) to receive site-local or global addresses. The next phase involves obtaining Router Advertisements from routers if any routers are present on the link. If no routers are present, a stateful configuration is required. If routers are present, the Router Advertisements notify what sort of configurations the hosts need to do and the hosts receive a global unicast IPv6 address.

The excellence level of Pass4itsure 300-101 dumps study materials is analyzed and approved by famous experts of the specific areas. You never experience preparing the https://www.pass4itsure.com/300-101.html dumps curriculum that there is any wrong or poor stuff included.

Read More Youtube:https://youtu.be/Kzd25sHJz1A